Devices Setting

This Device page is to show and manage all available devices

On the left side navigation, click “Settings” to open up setting page menu

device1

  1. On the table, are show all your device name, status and other.
  2. Certain device may show N/A status on battery column because it used direct power supply.

Add New Device

  1. To add a new device simply click on “Add New Device” button.
  2. Make sure to enter correct serial number of the device, also make sure to select correct device.
  3. After that simply select building and room/area for where the device will be installed.
  4. Click “Add Device” to add the device.
  5. Click “Close” to cancel.

device2

Device Update

  1. To update the device, click on “Check for Update“.
  2. Select the device that required update.
  3. Check on “Update All” to update all the device
  4. Click on “Update” button to start updating.
  5. Let it update for a few minute.
  6. Click “Close” to cancel update.

devices3

devices4

Change Device Location

  1. To change device location, inside the table on Action column, click on the edit icon to change device location.
  2. A new form will popup on screen.
  3. Select the building/room/area/zone/floor to assign the device on new location.
  4. Click on “Assign Location” button to assign it to new location.
  5. Click “Close” to cancel.

Enable/Disable Device

  1. To enable or disable the device, in the table on settings column, click the on gear icon.
  2. Turn it on to enable the device.
  3. Turn it off to disable the device.
  4. click “Save” to confirm your setting.
  5. Click “Close” to close the popup.

Return